Anemometer DT-620
- รายละเอียด
- หมวด: เครื่องวัดความเร็วลม แบบใบพัด
- เผยแพร่เมื่อ วันเสาร์, 01 มกราคม 2554 00:00
- เขียนโดย Joomla!
- ฮิต: 3740
เครื่องวัดความเร็วลม และอุณหภูมิ รุ่น DT-620
CFM/CMM Thermo-Anemometer + IR Thermometer
- สามารถวัดค่าความเร็วลม อุณหภูมิลม อัตราลม CFM/CMM อุณหภูมิพื้นผิวแบบอินฟราเรด
- ช่วงวัดความเร็วลม 0.40 ถึง 30 เมตร/วินาที(เลือกหน่วยได้ กม/ชม,ฟุต/นาทีฯ
- ช่วงวัดอัตราลม 0 ถึง 999,999 CFM/CMM อุณหภูมิ -10 ถึง 60C
- วัดอุณหภูมิแบบอินฟราเรด IR Thermometer ช่วงวัด -50 ถึง 260C
- สามารถบันทึกขนาดของพื้นที่หน้าตัดได้ถึง 8 ค่า (ตารางเมตร,ตารางฟุต)
- สามารถอ่านค่าเฉลี่ย 20 ค่า ของการวัดอัตราลม
- เซ็นเซอร์แบบใบพัด ขนาดเส้นผ่านศูนย์กลาง 72 มม แบบแรงเสียดทานต่ำ
- พร้อมฟังชั่น ค้างค่า,บันทึกค่าสูงสุด ต่ำสุด,ปิดเครื่องอัตโนมัติ
CFM/CMM Thermo-Anemometer + IR Thermometer Large display of Airflow or Air Velocity with built-in InfraRed Thermometer
- CFM/CMM Thermo- Anemometer with built-in non-contact IR Thermometer measures remote surface temperatures to 536°F (280°C) with 8:1 distance to spot ratio and Laser Pointer
- Simultaneous display of Air Flow or Air Velocity plus Ambient Temperature
- Easy to set Area dimensions (cm2) are stored in the meter’s internal memory for the next power on
- Resolution of 0.01m/sec
- 20 point average for Air Flow
- Super large (9999 count) LCD Backlit Display
- 3% velocity accuracy via low friction 2.83"D (72mm) ball bearing vane wheel on 3.9ft (120cm) cable
- Complete with vane sensor with 3.9ft (120cm) cable, 9V battery, and protective rubber holster
Features:
- CFM/CMM Thermo- Anemometer
- Simultaneous display of Air Flow or Air Velocity plus Ambient Temperature
- Easy to set Area dimensions (cm2) are stored in the meter's internal memory for the next power on
- 20 point average for Air Flow
- 3% velocity accuracy via low friction 2.83"D (72mm) ball bearing vane wheel on 3.9ft (120cm) cable
Applications:
- HVAC installation, repair, diagnostics, and optimization
- Fume hood testing, installation, and verification
- Ventilation system installation, servicing, and analysis
- Environmental wind and temperature testing/analysis
- Boiler rooms
- Ionizer flow output monitoring
- Automobile aerodynamic testing
- Plant/Facilities maintenance
Spec Summary:
|
Range |
Air Velocity: | 0.40 to 30.00 m/s 1.4 to 108.0 km/h 80 to 5906 ft/min 0.9 to 67.2 mph 0.8 to 58.3 knots |
Air Temperature: | 14 to 140°F (-10 to 60°C) |
Airflow: | 0 to 999999 CMM (m3/min) 0 to 999999 CMM (ft3/min) |